![]() Position the camera at the end point, and then press the mode button 5 times. The DS2 has a 60 second auto-sweep feature that allows you to program a 60 second movement. Pan-Follow Mode allows the gimbal to follow pan axis, and hold the tilt position.įollow Mode allows the camera to follow both tilt and pan directions.ģ-Axis Follow Mode has no restrictions as it allows the camera to follow pan, tilt, and roll. Lock Mode will allow the camera to hold a certain direction, and will not follow, pan, or tilt. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll. In Pitch and Yaw-Axis Follow mode, the DS2 will follow your pan and tilt movements. In Yaw-Axis Follow Mode, the DS2-A will only follow your pan movements. The DS2-A features 3 different follow modes. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes. Switch to Inverted Mode at any time by simply flipping the handle over the camera. After a few seconds, the camera will lock and hold its position until it is reset back to default. ![]() Quickly lock your camera into any position by manually pointing and holding it in any direction. The camera’s composition will stay the same no matter how you move the handle. In Lock Mode, the yaw, pitch, and roll axis work together to keep the camera pointed in one direction. This means that the gimbal will respond faster, balance easier, and have greater battery life. Using a 32-bit controller with a 12-bit encoder, the DS2-A uses an adaptive PID algorithm to produce an efficient handheld stabilizer. the DS2-A has the ability to stabilize a wide range of today’s popular DSLR & mirrorless cameras including the Canon 6D, Canon 7D, Sony a6500, Sony a7SII, Panasonic GH5, GoPro, or smartphone. The DS2-A features a 360 degree rotation brushless motor on the yaw axis for a higher range of mobility. This makes it easier to frame your shots and follow the action. The DS2-A is the first Ikan Beholder gimbal to feature an angled motor arm that gives you a better view of the camera’s screen. ![]() It is also versatile enough to be used with a DSLR, mirrorless camera, GoPro, or smartphone. The Beholder DS2-A is lightweight, easy to use, and can be carried in your camera bag. In addition, the DS2-A also features a 60 second Auto-Sweep mode, which allows you to program a 60 second camera movement. The DS2-A features a unique angled motor arm, which allows you to have a better view of the camera’s screen while using the gimbal. The Beholder DS2-A is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 5 lbs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |